What Is Silicone? An Industrial Material Guide
Silicone is a family of synthetic polymers built around silicon-oxygen bonds. It can be formulated as fluids, gels, resins or flexible elastomers. For industrial parts, the correct choice depends on grade, cure chemistry, hardness, geometry, exposure and finished-article evidence.
Silicone, Silicon and Silica Are Different Materials
The similar names often create specification errors, but silicone, silicon and silica describe different substances.
Silicon is the chemical element Si. In industrial supply chains, it appears in semiconductor materials, metal alloys and as a raw material for producing silicon-based compounds. It is not the soft, elastic substance used for flexible seals or tubing.
Silica is silicon dioxide, commonly written as SiO₂. Quartz and sand contain silica, which can serve as an upstream source for silicon production. Finely divided silica is also used as a reinforcing filler in many elastomer formulations.
Silicone refers to a broad family of synthetic polymers with alternating silicon and oxygen atoms in the main chain and organic groups attached to the silicon atoms. Depending on its formulation and molecular structure, it may become a fluid, grease, gel, resin, sealant or cured elastomer. This silicon-oxygen backbone is a defining feature of the polymer family
For an industrial rubber component, specifying only “silicon” is usually an error. A workable drawing or RFQ should identify silicone rubber and then define the grade, hardness, cure system, color, dimensions and operating condition
Author
Hi, I’m David Xu , Focus on the rubber products industry for 20 years. I design customized rubber products solutions,i brings practical insights into material selection,quality control,and application solutions. I’m here to share industry knowledge and best practices for customers and partners.
- riseuprubber.com
- 2026-11-19
- 22:04
Specification Interpretation Table
| Term Found in a Drawing or RFQ | Likely Meaning | Procurement Risk | Required Action |
|---|---|---|---|
| Silicon | Elemental silicon or a silicon-containing industrial material | May direct the inquiry to semiconductor, alloy or chemical suppliers | Ask whether the intended material is silicone rubber |
| Silica | Silicon dioxide in mineral or filler form | Does not define the base polymer of the component | Clarify whether silica is a filler, raw material or separate product |
| Silicone | A broad polymer family | Does not identify physical form, grade or cure chemistry | Define whether the project needs fluid, gel, resin, sealant or elastomer |
| Silicone rubber | A curable elastomeric formulation | Still leaves hardness, process and service performance unresolved | Add grade, hardness, cure system, dimensions, environment and acceptance criteria |
| Silicone part | A finished article made from a silicone formulation | May conceal differences in molding, extrusion, post-curing and testing | Request the drawing, production method, material declaration and inspection plan |
Why Molecular Structure Changes Performance?
Silicone cannot be understood from the name alone. Its behavior comes from the polymer structure, the organic groups attached to it, the reinforcing system and the way the compound is cured.
Polydimethylsiloxane, or PDMS, is a common example. Its backbone contains repeating silicon-oxygen units, while methyl groups are attached to the silicon atoms. Other organic groups, including vinyl or phenyl groups, may be introduced to support particular curing reactions or modify specific characteristics.
The siloxane chain is more flexible than the carbon-based backbone found in many conventional organic polymers. At the same time, the Si-O bond has relatively high bond energy. These structural characteristics help properly formulated grades remain flexible across a broad temperature range and withstand weathering better than many general-purpose elastomers. Molecular structure alone, however, does not guarantee the performance of a finished component.
Before curing, the polymer may be supplied as a pourable liquid or a high-consistency compound. Crosslinking connects separate chains into a three-dimensional network, turning the uncured formulation into an elastic solid. Fillers, pigments, catalysts, stabilizers and other additives are incorporated to control processing and final behavior.
Two compounds may both be described as silicone rubber yet differ significantly in viscosity, hardness, tear resistance, compression behavior, color stability or suitability for a particular production method. Approval should therefore be based on a defined formulation and validated component, not on the polymer name alone
From Silica to a Processable Base
Producing the base polymer is different from manufacturing a gasket, tube, grommet or other finished article. The upstream chemical process creates silicone raw materials; molding, extrusion and secondary operations later convert a selected compound into the required geometry.
A simplified production route includes five stages:
1.Producing silicon metal
Silica-rich raw material is processed at high temperature to obtain elemental silicon. The resulting material is refined and prepared for chemical conversion.
2.Creating chlorosilane intermediates
Finely divided silicon reacts with methyl chloride under controlled conditions. This reaction produces a mixture of methylchlorosilanes rather than a ready-to-use elastomer
3.Separating the reaction products
Distillation isolates the required chlorosilane fractions. This stage matters because different intermediates lead to different downstream structures and product families.
4.Forming siloxane units and polymer chains
Selected chlorosilanes undergo hydrolysis and condensation. Further polymerization or equilibration controls chain length, molecular distribution and the form of the resulting polymer.
5.Preparing a usable formulation
The base polymer is combined with reinforcing fillers, processing aids, pigments, crosslinking ingredients and other additives. The formulation may then be supplied as liquid silicone rubber, high-consistency rubber or another silicone system.
This sequence is intentionally simplified. Actual chemistry, equipment and process controls vary by producer and product family. It nevertheless explains why silica, silicon metal, silicone polymer and silicone rubber compound describe different stages rather than interchangeable material
Industrial buyers normally do not need to specify the upstream synthesis route. They do need traceable compound identification, an appropriate cure system and evidence that the selected formulation can meet the component’s dimensional and functional requirements
One Polymer Family, Many Commercial Forms
The term silicone covers multiple product families with different physical forms and functions. Some are designed to flow, lubricate, coat, bond or encapsulate. Others are formulated to cure into flexible elastomeric components.
This distinction should be established before comparing hardness, temperature capability or manufacturing cost. A silicone fluid cannot be evaluated as though it were a molded seal, while a room-temperature sealant should not be assumed to meet the dimensional controls of an injection-molded component.
For custom rubber products, the most relevant categories are usually liquid silicone rubber, high-consistency rubber and selected room-temperature-vulcanizing systems. Their supply condition, mixing requirements, curing method and practical manufacturing routes are differen
Silicone Form and Procurement Map
Silicone Family or Form | Typical Supply Condition | Common Function | Main Procurement Question |
Silicone fluid | Pourable liquid with viscosity determined by molecular weight and formulation | Lubrication, heat-transfer media, release control or formulation ingredient | Is the fluid itself the product, or is it an ingredient in another system? |
Silicone grease | Thickened, non-flowing or semi-flowing material | Lubrication, sealing assistance or electrical protection | What temperature, contact materials and migration limits apply? |
Silicone gel | Soft, lightly crosslinked system | Cushioning, encapsulation or protection of sensitive assemblies | What softness, tack, dielectric behavior and rework requirements must be controlled? |
Silicone resin | Highly crosslinked coating or binder system | Protective coatings, electrical insulation or heat-resistant finishes | Is flexibility required, or is a rigid coating acceptable? |
RTV silicone | One- or two-part system designed to cure near room temperature | Sealing, bonding, encapsulation, casting or low-volume fabrication | What cure chemistry, depth, environment and production rate are acceptable? |
Liquid silicone rubber | Pumpable two-part elastomer, commonly processed through metering and injection equipment | Precise molded components, complex shapes and high-volume production | Can the tooling, metering system and mold design control flash, venting and cure? |
High-consistency rubber | High-viscosity compound handled as a solid or putty-like material | Compression-molded parts, extruded profiles and silicone rubber tubing | Which molding or extrusion route matches the geometry and tolerance requirements? |
Typical Properties and Engineering Ranges
Silicone rubber is selected for more than flexibility. Its value lies in maintaining useful mechanical and electrical behavior under temperature change, outdoor exposure and electrically demanding conditions. The figures below are practical screening ranges, not universal specification limits. A supplier’s technical datasheet and finished-part testing must define the approved values.
Temperature Capability
For many industrial silicone rubber compounds, -60°C to 240°C can be used as an initial material-screening range. The allowable exposure depends on time, load, surrounding media, part geometry and the property that must be retained.
Continuous operation is often rated more conservatively than short peak exposure. A component that survives a brief period at 240°C may still harden, lose elongation or develop excessive compression set during prolonged service at the same temperature. Specialty formulations can extend low- or high-temperature capability, but they require grade-specific aging data.
Temperature evaluation should therefore define:
Minimum operating and cold-start temperature
Normal continuous temperature
Peak value and exposure duration
Compression, tension or movement during heating
Air, steam, oil, chemical or enclosed-service conditions
Permitted changes in hardness, tensile strength and elongation
Wacker describes long-term thermal resistance around -50°C to 180°C for general RTV elastomers, with specialty grades extending below -100°C or toward 270°C. It also notes that service duration and peak loading must be considered separately
Hardness Range
A common working range for molded or extruded silicone components is approximately 30 to 70 Shore A. Within this range, the compound can be adjusted for sealing, flexibility, insertion force, wall stability and handling during assembly.
Special formulations may extend the available range to roughly 20 to 90 Shore A, although the endpoints introduce additional design considerations:
Around 20 Shore A, thin walls may deform easily, handling can become difficult and dimensional inspection requires controlled support.
Between 30 and 50 Shore A, the cured article generally offers greater flexibility and lower assembly force.
Between 50 and 70 Shore A, higher stiffness can improve shape retention but may increase insertion or sealing force.
Near 80 or 90 Shore A, the elastomer becomes much less compliant; designers should verify whether it can still accommodate tolerances and maintain contact pressure.
Hardness alone does not define sealing performance. Two 50 Shore A compounds may differ in modulus, compression set, tear strength and stress relaxation
Mechanical Property Window
Typical silicone elastomers can be formulated across broad mechanical ranges. Depending on grade and test method, initial screening values may include
Property | Typical Engineering Range | Why It Matters |
Hardness | 30–70 Shore A for many standard components; approximately 20–90 Shore A with specialized formulations | Influences flexibility, insertion force, sealing contact and dimensional stability |
Tensile strength | Approximately 5–10 MPa for many reinforced grades | Indicates resistance to pulling but does not predict notch or cut growth |
Elongation at break | Commonly 200–700%; broader specialty ranges may be available | Supports stretching and assembly movement but must be assessed after aging |
Tear strength | Approximately 10–40 N/mm for many engineered grades | Important for thin lips, holes, sharp transitions and parts removed from tooling |
Compression set | Highly dependent on time, temperature, deflection and cure condition | Affects the ability of a gasket or static seal to maintain contact pressure |
These values should not be copied directly into a drawing without identifying the test standard, specimen geometry, cure condition and acceptance range
Electrical Insulation Performance
Many insulating silicone rubber compounds have high volume resistivity, useful dielectric strength and comparatively stable electrical behavior across temperature and frequency changes. Published product data commonly show:
Volume resistivity: approximately 10¹⁴ to 10¹⁶ Ω·cm for insulating grades
Dielectric strength: often around 20 to 30 kV/mm, depending on formulation, specimen thickness and test method
Dielectric constant: commonly in the low single digits for unfilled or conventionally filled insulating compounds
Low dielectric loss: available in formulations intended for electrical protection and encapsulation
For example, Dow lists volume resistivity of 2.9 × 10¹⁴ Ω·cm and dielectric strength of approximately 17.7 kV/mm for one cured encapsulating elastomer. A separate flame-resistant silicone base is reported at 1 × 10¹⁵ to 5 × 10¹⁶ Ω·cm with dielectric strength between 20 and 40 kV/mm. These examples demonstrate the variation between products rather than establishing one value for all silicone rubber
Silicone rubber can also provide useful corona, arc, tracking and erosion resistance in appropriately formulated high-voltage grades. These characteristics make it suitable for insulators, cable accessories, protective boots, connector seals and electrical barriers. They are not automatic properties of every compound. Pigments, conductive fillers, contamination, moisture, wall thickness, creepage distance and surface condition can alter the result
Weathering and Environmental Stability
Properly formulated silicone elastomers generally resist ozone, ultraviolet exposure and oxidation better than many general-purpose rubbers. Their hydrophobic surface can also support electrical performance in wet outdoor environments.
Environmental resistance does not mean universal chemical compatibility. Fuels, concentrated acids or alkalis, solvents, hot oils and pressurized steam may cause swelling, softening, loss of strength or other changes. Exposure testing should use the actual fluid, concentration, temperature and duration
Engineering Screening Table
Project Condition | Suitable Starting Point | Evidence Required Before Approval |
Service between -60°C and 200°C | General heat-resistant silicone grade | Thermal-aging results at actual time and load |
Repeated exposure approaching 240°C | High-temperature formulation | Retained hardness, tensile strength, elongation and compression set |
Soft sealing or easy assembly | Approximately 20–40 Shore A | Dimensional stability, tear strength and assembly trial |
General molded seal or grommet | Approximately 40–70 Shore A | Compression behavior, tolerance and functional test |
Rigid elastomeric support | Approximately 70–90 Shore A specialty grade | Contact pressure, flexibility and stress-relaxation assessment |
Electrical insulation | Insulating or high-voltage compound | Volume resistivity, dielectric strength, tracking and environmental tests |
Outdoor high-voltage use | Hydrophobic, tracking-resistant formulation | Wet electrical performance, corona/arc exposure and aging evidenc |
Limits and Common Failure Risks
Silicone rubber is not the best choice for every flexible component. Broad temperature capability and electrical stability can be valuable, but they do not compensate for unsuitable fluid exposure, poor geometry or an incorrect production grade
Tear and Cut Sensitivity
Standard silicone compounds generally have lower tear and cut-growth resistance than tougher elastomers such as polyurethane or some reinforced natural-rubber formulations. A small nick created during trimming, assembly or service can become a failure origin.
Risk increases around:
Sharp internal corners
Thin sealing lips
Pierced holes and narrow slots
Abrupt wall-thickness transitions
Rough mating surfaces
Excessive stretching during installation
Poorly controlled flash trimming
Higher-tear grades may reduce the risk, but geometry remains important. Increasing the radius, removing sharp edges and controlling the assembly path can be more effective than specifying tensile strength alone
Abrasion and Dynamic Wear
General-purpose silicone rubber is not normally the first choice for continuous sliding, scraping or abrasive contact. Repeated movement against a rough shaft or housing may damage the surface even when temperature and weather resistance are acceptable.
Dynamic seals should be evaluated for contact pressure, surface finish, lubrication, movement speed, stroke length and generated heat. Where wear is the dominant failure mode, another elastomer or a low-friction interface may provide a better starting point.
Parker describes silicone elastomers as having relatively low tensile strength, poor tear strength and limited wear resistance compared with several other sealing material
Gas and Vapor Permeability
Silicone rubber is relatively permeable to gases. This characteristic can be useful in breathable membranes, but it creates risk in pneumatic sealing, vacuum systems and tubing that must limit gas loss or vapor transmission.
Permeation is different from leakage through a gap. A component may have no visible defect and still allow molecules to pass through the elastomer. The rate is affected by:
Gas type
Pressure differential
Wall thickness
Exposed surface area
Temperature
Compound formulation
Required service duration
Fuels, Oils and Solvents
Standard VMQ silicone may swell in hydrocarbon fuels, aromatic solvents, ketones, esters and some oils. Swelling can change dimensions, reduce strength, soften the component or increase compression set.
Chemical compatibility should be evaluated with the exact fluid rather than a general description such as oil resistant. The test plan should define:
Fluid name and formulation
Concentration
Operating and peak temperatures
Immersion or intermittent-contact time
Pressure and mechanical load
Allowable volume, mass and hardness change
Required retained tensile or sealing performance
When low-temperature flexibility and improved fuel resistance are both needed, fluorosilicone may be considered. It is a separate material family and should not be presented as a universal replacement for standard VMQ
Compression Set and Stress Relaxation
A silicone gasket can pass an initial leakage test but gradually lose sealing force. Compression set measures the permanent deformation remaining after a compressed specimen is released. Stress relaxation describes the reduction in force while the component remains compressed.
The two properties are related to long-term sealing but are not interchangeable. Results depend on:
Compound and cure system
Post-cure condition
Compression percentage
Test time and temperature
Cross-sectional geometry
Constraint inside the assembly
Contact with fluids
Hardness alone cannot predict either behavior. A high-temperature seal should be tested after representative aging while compressed in a fixture or actual assembly
Bonding, Printing and Coating
Bonding, Printing and Coating
The low surface energy that supports release behavior can also make silicone difficult to bond or print. An adhesive that works on metal, EPDM or plastic may not adhere reliably to a cured silicone surface.
Depending on the design, successful bonding may require:
A silicone-compatible adhesive
Plasma, corona or chemical surface treatment
Primer
Controlled cleaning
Mechanical interlocking
Insert molding or overmolding with a validated substrate
Surface treatment effectiveness can decline with time. Bonded samples should therefore represent the actual cleaning, treatment, storage and assembly sequence
Extractables, Volatiles and Silicone Transfer
Extractables, Volatiles and Silicone Transfer
Some formulations may release low-molecular-weight siloxanes, processing residues or other extractable substances. These may matter in optical, electronic, painted, adhesive-bonded or highly controlled applications.
Possible effects include surface contamination, reduced adhesion, optical deposits or interference with nearby processes. Low-volatility or specially controlled grades may be required, followed by suitable post-curing and cleanliness verification.
High Temperature Does Not Mean Unlimited Life
A published upper temperature is not a guaranteed service-life value. Extended heat exposure can increase hardness, reduce elongation and weaken thin or highly strained areas. Oxygen availability, load and exposure duration influence the aging mechanism.
A credible approval plan compares original properties with aged results and defines acceptable change. For sealing components, dimensional inspection should be combined with compression behavior and an assembly leakage test
Molding, Extrusion and Other Production Routes
Once a compound has been selected, the production method determines which geometries, tolerances and surface conditions are practical. A suitable formulation can still produce an unreliable component when the tooling, cure cycle or secondary operations do not match the design
Compression Molding
Compression molding commonly uses premeasured pieces of high-consistency rubber. The uncured compound is placed in a heated mold, compressed into the cavity and held until sufficient crosslinking occurs.
This route is suitable for many:
Sealing rings
Diaphragms
Protective boots
Vibration-control components
Low- to medium-volume custom shapes
Material placement, preform weight, mold temperature, pressure and cure time influence cavity filling and dimensional consistency. Poor control may cause short fills, trapped air, excessive flash or uneven cure.
Compression molding can be practical for larger cross-sections and relatively simple tooling. However, complex undercuts, very thin features and tight flash requirements may need a different process or additional trimming
Liquid Injection Molding
Liquid silicone rubber is commonly supplied as two components that are stored separately, accurately metered, mixed and injected into a heated mold. The low initial viscosity allows the formulation to fill small features and complex cavities.
Liquid injection molding can support:
Thin walls
Complex molded geometry
Small precision features
Automated demolding
Insert molding
High production volumes
Components requiring consistent repeatability
Critical controls include mixing ratio, material temperature, injection pressure, venting, mold temperature and cure time. Because the uncured mixture flows easily, poorly controlled parting lines or vents may produce thin flash.
Platinum-cured LSR can also be sensitive to cure inhibition. Certain sulfur-containing substances, amines, organotin compounds, plasticizers or contaminated surfaces may interfere with crosslinking. Incoming materials, mold-release products, inserts and cleaning chemicals should therefore be reviewed before production
High-Consistency Rubber Injection and Transfer Molding
HCR compounds may also be processed by injection or transfer molding. In transfer molding, a measured charge is placed in a chamber and forced through runners into closed cavities. This can improve material distribution around inserts or across multiple cavities compared with basic compression molding.
The production team must account for compound viscosity, runner design, pressure loss, trapped air and material remaining in the transfer system. These factors affect waste, cycle time and dimensional stability.
Extrusion
Extrusion is used to manufacture continuous silicone rubber tubing, profiles, and sealing strips. The uncured compound is forced through a die, supported as it exits and then vulcanized through a continuous heating process.
The die opening does not equal the final dimensions. Die swell, shrinkage, line speed, cure temperature, tension and post-curing can change inner diameter, outer diameter, wall thickness and profile geometry.
For silicone tubing, a useful specification normally includes:
Inner diameter
Outer diameter or wall thickness
Permitted concentricity and ovality
Cut length and length tolerance
Surface condition
Color and translucency
Hardness
Bend or kink requirements
Working medium, temperature and pressure
Cleanliness and packaging expectations
Very soft compounds and thin walls may deform during measurement. Inspection methods should define whether dimensions are checked in a free state, on a mandrel or with non-contact equipment
Calendering and Sheeting
Calendering passes the uncured compound through controlled rolls to produce sheet of a defined thickness. The sheet may then be cured, laminated, reinforced, cut or converted into gaskets and other flat components.
Important variables include roll gap, compound temperature, line tension, thickness uniformity and reinforcement position. A gasket cut from sheet does not have the same material flow, edge condition or dimensional behavior as a directly molded par
RTV Casting, Dispensing and Encapsulation
Room-temperature-vulcanizing systems may be poured, dispensed or injected at relatively low pressure. They are used for encapsulation, potting, formed-in-place sealing, prototypes and selected low-volume components.
Mix ratio, degassing, working time, cure depth, humidity and substrate condition can affect the result. Condensation-cure and addition-cure RTV systems should not be treated as interchangeable because their cure mechanisms, by-products and contamination sensitivities differ.
Post-Curing and Secondary Operations
Some formulations require or benefit from post-curing after the main molding or extrusion stage. A controlled heat treatment may complete crosslinking, reduce certain volatile residues and stabilize properties.
Post-curing conditions must be matched to the compound, component thickness and intended application. Excessive time or temperature can change color, hardness or dimensions.
Secondary operations may include:
Flash removal
Cutting to length
Hole punching
Surface treatment
Printing or marking
Adhesive bonding
Cleaning
Inspection
Controlled packaging
Each operation can introduce defects. Cutting may initiate tears, treatment may lose effectiveness during storage, and unsuitable packaging can deform soft components
Process Selection and Control Matrix
Required Product | Practical Starting Process | Main Variables to Control | Evidence Needed |
Gasket, grommet or molded seal | Compression, transfer or injection molding | Charge weight, cavity fill, flash, venting, temperature and cure | Dimensional report, visual criteria and functional sealing test |
Thin complex component | Liquid injection molding | Mix ratio, injection conditions, venting, mold temperature and cure inhibition | Cavity inspection, flash limit, cure verification and capability data |
Silicone rubber tubing | HCR extrusion and continuous vulcanization | Die design, line speed, ID, OD, wall, ovality, tension and cure | Dimensional inspection, bend evaluation and application testing |
Continuous profile or cord | Extrusion | Cross-sectional stability, shrinkage, splice control and cut length | Profile measurement and assembly trial |
Flat gasket cut from sheet | Calendering followed by cutting | Sheet thickness, reinforcement, cut quality and flatness | Thickness map, edge inspection and compression test |
Encapsulation or formed-in-place seal | RTV dispensing or casting | Ratio, mixing, bubbles, working time, cure depth and adhesion | Cure record, void inspection and substrate adhesion test |
Part bonded to metal or plastic | Insert molding, overmolding or secondary bonding | Surface cleanliness, treatment, insert temperature and bond geometry | Peel, pull or application-specific bond test |
Choosing a Suitable Grade
Selecting a silicone grade should begin with the component’s failure risk, not with color, hardness or a general temperature claim. The same polymer family can be formulated for very different purposes, including electrical insulation, conductivity, fuel resistance, flame behavior, low compression set or controlled human contact
1. Define What the Component Must Do
Start with the primary function. A part may need to:
Maintain a static seal
Carry air or fluid
Protect a cable opening
Electrically isolate two surfaces
Absorb movement or vibration
Prevent dust or moisture entry
Connect two fittings
Protect an assembly from heat
Contact food, skin or medical equipment
One component may perform several functions, but the most serious failure should control the initial selection. For example, a tube that remains flexible at high temperature is still unsuitable if its gas permeability causes unacceptable pressure loss
2. Convert Temperature Into an Exposure Profile
Do not select a grade from the maximum temperature alone. Record:
Minimum and maximum operating temperatures
Continuous and peak conditions
Heating and cooling rate
Number of thermal cycles
Time spent at each temperature
Mechanical load during exposure
Contact with air, oil, steam or chemicals
A standard heat-resistant VMQ may suit prolonged exposure within its documented range. A higher-temperature compound may be needed when retention of elongation, sealing force or dielectric performance is required after severe aging.
For low-temperature movement, confirm that the selected formulation remains flexible at startup rather than merely surviving storage
3. Match Hardness to Geometry and Assembly
Hardness should be selected together with wall thickness, compression, insertion method and tolerance stack.
A soft compound can reduce assembly force and conform to uneven surfaces, but it may deform during handling or extrude through a clearance. A harder formulation can improve shape retention while increasing contact force and reducing the ability to absorb dimensional variation.
For a grommet, review panel thickness, groove dimensions, cable diameter and insertion force. For a gasket, calculate available compression and confirm that the joint can maintain load. Tubing selection should include wall stability, bend radius, connection retention and resistance to kinking
4. Identify the Exact Contact Media
List every liquid, gas, cleaning agent, lubricant and process chemical that may contact the component. Include incidental exposure during assembly and maintenance.
Standard VMQ should not be approved for fuel or solvent service based only on heat resistance. Where petroleum fuels or hydrocarbon oils dominate the risk, fluorosilicone may provide better resistance while retaining useful low-temperature behavior. Its mechanical, permeability and cost implications must still be reviewed.
Hot water and steam also need separate evaluation. A grade that performs well in dry heat may behave differently under prolonged hydrothermal exposure
5. Choose the Required Functional Formulation
The base polymer does not define all functional behavior. Depending on the project, the compound may need to be:
High-tear: for thin lips, pierced features, difficult demolding or stretched assembly
Low-compression-set: for static sealing and long-term contact-pressure retention
Electrically insulating: for barriers, connector seals or protective components
Electrically conductive: for grounding, static dissipation or electromagnetic shielding
Thermally conductive: for heat-transfer interfaces
Flame-retardant: for applications with defined flammability requirements
Low-volatility: for optical, electronic or contamination-sensitive assemblies
Metal detectable: for selected food-processing environments
Self-bonding or adhesion-modified: for overmolding onto a validated substrate
Fluorosilicone: for improved resistance to fuels and selected hydrocarbon fluids
Some requirements conflict. Conductive fillers can reduce electrical insulation, high filler loading may change flexibility, and flame-retardant additives may alter color or mechanical behavior. Prioritize requirements instead of requesting every special property in one formulation
6. Review Cure Chemistry
Peroxide-cured and addition-cured silicone compounds may differ in processing, residual by-products, post-curing needs and contact suitability.
Platinum-cured systems are often considered when cleanliness, low odor, transparency or controlled-contact requirements are important. They can be sensitive to catalyst poisons introduced by incompatible materials or contaminated equipment.
Peroxide-cured compounds can be practical for many molding and extrusion processes, but the selected cure agent and post-cure schedule may affect odor, volatiles, color and final properties.
The drawing should not specify a cure system without a functional reason. Instead, define the required performance and regulatory evidence, then evaluate whether the proposed chemistry can meet it.
7. Separate Color From Material Performance
Color is not proof of grade or compliance. A translucent component is not automatically food-contact or medical grade, and a red-orange product is not automatically suitable for elevated temperature.
Pigments may affect optical appearance, traceability and, in some formulations, electrical or mechanical behavior. Define an approved color reference and tolerance if appearance is important, but qualify the material through documentation and testing
8. Confirm Regulatory and Contact Requirements
For controlled applications, specify the exact destination market and applicable requirement. Examples may include:
FDA requirements for repeated-use rubber articles
EU food-contact rules
BfR recommendations
USP Class VI
ISO 10993 biological evaluation
UL flammability or electrical recognition
Customer-restricted substance lists
RoHS or REACH documentation
9. Approve the Combination, Not Just the Grade
Final approval should cover the compound, production method, cure condition, geometry and relevant secondary operations. A material test slab may confirm basic physical properties but cannot demonstrate tube dimensions, molded flash, bond strength, assembly behavior or leakage performance.
If any of these elements change after approval, the supplier and customer should assess whether revalidation is required
Illustrative Tubing Selection Workflow
Consider an electrical-equipment OEM developing a sensor assembly near a heated enclosure. The initial drawing specifies only:
> Silicone tube, translucent, 50 Shore A.
This description identifies a product family and approximate hardness, but it does not provide enough information for reliable material selection, quotation or validation.
The following example is illustrative. It demonstrates an engineering workflow and should not be presented as a completed customer case without approved project records
Step 1: Identify the Tube’s Actual Function
The tube is not carrying liquid. It covers and electrically separates a sensor lead while protecting it from contact with a warm metal housing.
Its main functions are therefore:
Electrical isolation
Protection from incidental contact
Flexibility during assembly
Dimensional retention around the lead
Resistance to repeated temperature exposure
Because it is not a pressure line, burst strength is not the primary decision factor. Dielectric behavior, wall consistency, bending and heat aging are more relevan
Step 2: Replace General Requirements With Measurable Conditions
The OEM defines the operating profile as:
Continuous temperature: 180°C
Peak temperature: 230°C for up to 10 minutes
Minimum startup temperature: -40°C
No continuous oil or fuel exposure
Occasional contact with assembly cleaner
Required inner diameter: 5.0 mm
Required outer diameter: 8.0 mm
Tight bend near the sensor body
No visible collapse after installation
Electrical insulation required after thermal aging
These conditions create a more useful basis for selecting the compound and extrusion process
Step 3: Identify the Main Failure Risks
The engineering review identifies five possible problems:
Wall variation could create a thin area with reduced electrical protection.
Excessive softness could allow the tube to flatten at the bend.
An unsuitable high-temperature grade could harden after repeated exposure.
Poorly controlled extrusion could produce unacceptable ovality or ID variation.
Cleaning-agent residue could affect the surface or migrate into the assembly.
This step prevents the project from focusing only on Shore hardness
Step 4: Define a Candidate Material and Process
A practical starting point would be an extrusion-grade, electrically insulating VMQ compound with documented heat-aging behavior. The final hardness should be selected after checking flexibility, wall stability and assembly force rather than automatically accepting 50 Shore A.
The proposed production route would include:
Controlled HCR extrusion
Continuous vulcanization
Post-curing when required by the approved formulation
Cut-to-length processing
Dimensional inspection in a defined measurement condition
Clean packaging suitable for the assembly environment
This is a candidate route, not an approved specification. The compound supplier’s technical data and representative samples must support the decision
Step 5: Convert the Drawing Into a Functional Specification
The revised drawing should define:
Material family and approved compound reference
Cure system when functionally necessary
Shore A hardness and tolerance
Inner diameter, outer diameter and wall thickness
Applicable dimensional tolerance
Ovality and concentricity limits
Cut length and end condition
Color or translucency standard
Surface-defect criteria
Bend or kink test
Thermal-aging condition
Electrical acceptance test
Cleanliness and packaging requirements
Change-control expectations
For silicone tubing within an approved size and hardness range, a general dimensional tolerance of ±0.15 mm may be used as a practical production starting point. Where the assembly requires closer control, selected dimensions may be held to approximately ±0.05 mm, subject to manufacturing-feasibility review and an agreed inspection method.
The tighter value should not be applied automatically to every ID, OD, wall thickness or cut length. Very soft compounds, thin walls, large diameters and unsupported measurements can increase apparent variation. The drawing should identify which dimension requires the strict tolerance and how it will be measured
Step 6: Validate Representative Samples
Samples should be produced with the intended compound, die design, vulcanization route and post-cure condition. Testing a hand-made tube or substitute grade may confirm approximate fit but cannot validate production performance.
The dimensional inspection plan should state:
Whether ±0.15 mm or ±0.05 mm applies
Which characteristic the tolerance controls
Measurement temperature
Conditioning time before inspection
Free-state, mandrel-supported or non-contact measurement
Number and location of measurement points
Treatment of ovality and concentricity
Gauge resolution and calibration status
For a tube specified at 5.0 mm ID and 8.0 mm OD, a general tolerance could initially be written as:
ID: 5.0 ± 0.15 mm
OD: 8.0 ± 0.15 mm
If assembly testing shows that one interface requires tighter control, that critical dimension may be revised to ±0.05 mm after process-capability confirmation. The other dimensions do not need to receive the same strict tolerance unless their functional effect justifies it.
The remaining validation plan should include:
Wall-thickness measurements
Ovality and concentricity assessment
Bend test at the minimum installation radius
Assembly trial with the actual lead and housing
Heat aging at a defined time and temperature
Hardness and elongation comparison before and after aging
Dielectric strength or application-specific electrical testing
Visual inspection for cracks, surface defects and discoloration
Evaluation after contact with the assembly cleane
Step 7: Establish Production Controls
After sample approval, the control plan should link the accepted requirements to production records. Depending on risk, controls may include incoming compound identification, extrusion dimensions, cure settings, post-cure batch records, cut length, visual inspection and packaging verification.
Any change to compound, catalyst, production line, die, cure condition or secondary operation should be reviewed for its effect on the approved results.
Commercial Action Path
This example creates a complete buyer journey:
Begin with the component function.
Document the operating conditions.
Identify the likely failure modes.
Select a candidate formulation and production route.
Convert those decisions into drawing requirements.
Produce representative samples.
Validate the tube in the actual assembly.
Approve production controls and change management.
Release the purchase specification.
The process turns the vague phrase “silicone tube” into a controllable component specification without assuming that every silicone formulation performs in the same way.
Tests, Reports and Approval Records
Validation should prove that the delivered component performs as intended, not merely that the raw compound matches a generic silicone datasheet. Material properties, production records, dimensional inspection and application testing provide different types of evidence.
1. Material Technical Datasheet
A technical datasheet describes typical properties of a commercial compound. It may include hardness, tensile strength, elongation, tear strength, density, cure conditions and electrical values.
These figures are useful for screening, but they are normally typical rather than guaranteed lot results. They may also come from standard test slabs rather than the manufactured component
2. Batch Certificate or Certificate of Analysis
A certificate of analysis links selected test results to a production batch. It should identify:
Compound name or internal material code
Batch or lot number
Manufacturing or release date
Tested characteristics
Test method
Specification limits
Actual results
Approval status
3. Finished-Part Inspection Report
This report verifies characteristics created or influenced by manufacturing. Depending on the product, it may include:
ID, OD, wall thickness and cut length
Molded dimensions
Ovality and concentricity
Flash and parting-line condition
Surface defects
Color
Weight
Hardness
Post-cure status
Packaging condition
4. Application Validation
Application testing evaluates the component in a representative assembly and environment. It may assess leakage, pressure retention, bending, insertion force, electrical isolation, thermal cycling, fluid exposure or long-term compression.
This is the strongest evidence of suitability because it includes the effects of geometry, interfaces and actual loading. It does not eliminate production inspection; both are needed for controlled release.
Test Methods and What They Prove
Characteristic | Common Reference Method | What the Result Indicates | Important Limitation |
Shore A hardness | ASTM D2240 or ISO 48-4 | Resistance to indentation under defined conditions | Does not directly predict modulus, sealing force or compression set |
Tensile strength and elongation | ASTM D412 or ISO 37 | Behavior of a standardized specimen under tension | Results depend on specimen shape, extension rate, temperature and conditioning |
Tear strength | ASTM D624 or ISO 34-1 | Resistance to propagation of a defined cut or notch | Different die geometries can produce non-equivalent results |
Compression set | ASTM D395 or ISO 815-1 | Permanent deformation after controlled compression and recovery | Test temperature, time, deflection and method must be reported |
Heat aging | ASTM D573 or ISO 188 | Change in selected properties after hot-air exposure | Does not automatically reproduce load, fluid contact or oxygen conditions in service |
Fluid immersion | ASTM D471 or ISO 1817 | Changes in volume, mass, hardness and mechanical properties after fluid exposure | The actual fluid, concentration, time and temperature must match the project |
Dielectric strength | ASTM D149 or IEC 60243-1 | Breakdown strength through a solid insulating specimen | Strongly influenced by thickness, electrodes, voltage rate and surrounding medium |
Volume resistivity | ASTM D257 or IEC 62631-3-1 | Resistance to current flow through the material | Contamination, humidity, specimen preparation and conditioning affect results |
Flammability | UL 94 or an application-specific standard | Burning behavior under a defined laboratory configuration | A material rating does not automatically certify the finished product |
Dimensional inspection | Approved drawing and agreed measurement procedure | Conformance of the delivered geometry | Soft or curved parts can deform under measurement force |
Hardness Testing on Finished Components
A Shore A reading requires sufficient material thickness and a suitable measurement surface. Thin tubing walls, curved profiles and small molded features may not provide a valid test location.
Possible approaches include:
Testing a standard plaque cured with the production batch
Stacking permitted specimens when the method allows it
Using a micro-hardness method for small sections
Recording hardness as a compound-control result rather than a direct tube-wall measurement
The inspection plan should state where and how hardness is measured. A reading taken on an unsupported curved wall should not be compared directly with a flat laboratory plaque
Thermal-Aging Evidence
A useful heat-aging report should show both original and aged results. Relevant changes may include:
Hardness change in Shore A points
Percentage change in tensile strength
Percentage change in elongation
Change in tear strength
Dimensional movement
Compression-set result
Surface cracks, tack, discoloration or deformation
The report should identify exposure temperature, duration, air circulation, specimen condition and recovery time before measurement.
Testing at 240°C for a few hours cannot independently establish multi-year service life. Accelerated aging requires an appropriate model and more than one exposure condition if the result will be used for life prediction.
Compression-Set Reporting
A compression-set value is incomplete unless the report includes the method, temperature, duration, compression level and recovery condition.
ASTM D395 includes different methods for constant force and constant deflection. Its primary relevance is rubber exposed to compressive stress, particularly in static service.ASTM D39
Electrical Test Evidence
Electrical reports require more detail than a single dielectric-strength value. For ASTM D149 testing, the specimen preparation, conditioning, surrounding medium, electrode configuration, voltage application and failure criterion can affect the result.ASTM D149 (https://store.astm.org/standards/d149)
For an insulating silicone component, the validation plan may need to include:
Dielectric strength
Volume resistivity
Insulation resistance
Tracking or erosion resistance
Arc or corona exposure
Performance after heat aging
Performance after humidity or fluid exposure
Creepage and clearance in the finished assembly
A high material value cannot compensate for an air gap, thin wall, contamination path or unsuitable component geometry
Dimensional Measurement for Soft Tubing
Silicone tubing can deform under gauge pressure. The report should define whether dimensions are measured:
In the free state
On a specified mandrel
With an optical or non-contact system
At defined positions around the circumference
Before or after post-curing
After a stated conditioning period
For the tubing example in Module 09, the inspection record should distinguish the normal ±0.15 mm tolerance from any critical dimension approved at ±0.05 mm. The stricter limit requires suitable gauge resolution and verified process capability
Minimum Contents of an Approval Report
A complete approval record should contain:
Drawing number and revision
Material or compound identification
Batch number
Production method
Cure and post-cure condition
Sample quantity
Test methods
Test conditions
Acceptance limits
Actual measured results
Equipment identification or calibration status
Deviations
Photographs where useful
Reviewer and approval status
Traceability to retained samples or production batch
Statements such as “tested,” “high-temperature resistant” or “meets electrical requirements” are not adequate without conditions and measured results
Industrial Uses and Their Critical Proof
Silicone appears in many industries, but its role changes with the application. A tubing specification, electrical insulator and static gasket should not use the same approval criteria merely because they share the same base polymer family
Electrical and Electronic Equipment
Silicone rubber is used where electrical insulation must coexist with temperature variation, moisture or mechanical movement. Typical product forms include:
Connector seals
Cable-entry grommets
Insulating boots
Wire and sensor protection tubing
Keypads and flexible switching elements
Potting and encapsulation systems
High-voltage insulator components
Thermal-interface pads
For these applications, a project may need to control dielectric strength, volume resistivity, tracking resistance, flame behavior, wall thickness and contamination. Conductive or thermally conductive grades should be treated separately from insulating compounds.
An electrically insulating formulation may fail after assembly if a thin section, surface deposit or inadequate creepage path creates a local weakness. Validation should therefore include the finished geometry and surrounding hardware
Industrial Sealing
Silicone is used for static seals exposed to heat, weather or repeated temperature cycling. Examples include:
Flat gaskets
Molded sealing rings
Enclosure seals
Oven and heater seals
Lighting-system gaskets
Access-panel seals
Protective dust and moisture barriers
The design should define compression, flange condition, fastener load, surface finish and permitted leakage. High-temperature capability alone does not ensure long-term sealing. Compression set, stress relaxation and joint movement may control service life.
For dynamic sliding or heavily abrasive service, another elastomer may be more suitable unless a validated design addresses friction and wear.
Silicone Rubber Tubing
Extruded tubing can be used for air, water, drainage, laboratory transfer, equipment connections and protective sleeving. Selection should begin with the actual function because a tube carrying fluid has different requirements from one used only as an insulating cover.
Relevant design inputs include:
ID, OD and wall thickness
Pressure or vacuum
Fluid or gas identity
Continuous and peak temperature
Bend radius
Kink resistance
Connection method
Pull-off force
Gas and vapor permeability
Cleanliness
Sterilization or washing conditions
Cut length and packaging
The general ±0.15 mm dimensional tolerance and the stricter ±0.05 mm capability discussed earlier should be assigned only after reviewing size, hardness, wall geometry and measurement conditions.
When pressure is involved, working pressure should not be inferred from wall thickness alone. Compound strength, diameter, temperature, fittings, safety factor and aging condition all affect the result
Food and Beverage Equipment
Selected silicone grades are used in processing, dispensing, filling and sealing equipment because they can be formulated for repeated-use food-contact applications and cleaned under controlled conditions.
Possible components include:
Transfer tubing
Filling-machine seals
Door and access gaskets
Flexible connectors
Dispensing valves
Protective covers
Approval should identify the destination market, applicable food-contact regulation, colorant status, cure condition and cleaning process. A declaration for the raw compound does not automatically establish compliance of the finished product.
The project should also consider whether the component can trap product, absorb cleaning chemicals or release particles during repeated assembly.
Healthcare and Laboratory Equipment
Silicone elastomers can be used in selected respiratory, diagnostic, laboratory and fluid-management equipment. Their flexibility, transparency options and broad temperature behavior can be useful, but “medical-grade silicone” is not a complete specification.
Depending on the intended contact, the project may need:
Biological evaluation
Extractables and leachables assessment
Sterilization compatibility
Particulate and cleanliness controls
Traceability
Change notification
Controlled manufacturing environment
Finished-device risk assessment
Transportation and Mobility
In vehicles, rail equipment and other transportation systems, silicone components may encounter heat, vibration, outdoor weathering and electrical exposure. Product forms can include:
Sensor and connector seals
Lighting gaskets
Battery-system protection
Cable boots
Thermal-management components
High-temperature tubing
Vibration-isolation parts
Engine oil, fuel, coolant, brake fluid and cleaning chemicals must be identified separately. Standard VMQ should not be selected for an under-hood application solely because its temperature rating is acceptable.
For fuel or oil exposure, fluorosilicone or another elastomer may be more appropriate after compatibility and mechanical review.
Heating and Process Equipment
Silicone seals and profiles can be used around ovens, heaters, drying systems and other equipment exposed to elevated temperature.
Important design variables include:
Continuous temperature
Radiant versus conducted heat
Thermal cycling
Joint movement
Compression level
Airflow
Oxidation
Cleaning chemicals
Required replacement interval
Application-to-Evidence Principle
The material name identifies a possible starting point. The application determines which evidence is relevant.
For example:
Electrical protection requires dielectric and geometry evidence.
Static sealing requires compression and leakage evidence.
Fluid transfer requires compatibility, pressure and cleanliness evidence.
Outdoor service requires aging and wet-performance evidence.
Controlled contact requires regulatory and traceability evidence.
This distinction prevents one generic silicone datasheet from being used to approve unrelated component
What to Send With an RFQ
Send the latest drawing, part function, critical dimensions, measurement method, service profile, every contact medium, mandatory performance limits, destination-market requirements, sample plan and expected annual volume. For tubing, add ID, OD, wall, cut length, ovality, bend radius, connection, pressure or vacuum, cleanliness and packaging. For molded seals, add groove or flange data, compression, fastener load, surface condition, leakage limit and flash location. Separate essential limits from preferences and identify which dimensions need tighter control. Name the required certificate or report instead of requesting generic compliance
1. Part Identity and Function
State what the component does in the assembly.
Include:
Part name and number
Drawing revision
Primary function
Location in the assembly
Consequence of failure
Existing problem or reason for development
Prototype, replacement or new-production status
“Silicone gasket” is not a sufficient function. Explain whether it prevents water entry, contains air pressure, electrically isolates a housing or protects against dust.
2. Drawing and Geometry
Provide a dimensioned drawing whenever possible. A sample can support evaluation, but it should not replace the original design information.
The drawing should identify:
Critical and noncritical dimensions
Datum structure
General tolerances
Any dimensions requiring ±0.05 mm control
Dimensions using the normal ±0.15 mm starting tolerance
Surface finish where relevant
Flash and parting-line limits
Radii and permitted edge conditions
Color and appearance
Marking requirements
For soft tubing or flexible profiles, also define the measurement condition. The manufacturer needs to know whether dimensions are measured freely, on a mandrel or with non-contact equipment.
3. Service Environment
Describe the complete operating profile rather than providing only the maximum temperature.
Include:
Minimum, continuous and peak temperatures
Duration of peak exposure
Thermal-cycle frequency
Indoor or outdoor use
UV, ozone and weather exposure
Pressure or vacuum
Static or dynamic movement
Compression or stretching
Vibration
Expected service life
Maintenance or replacement interval
When the local component temperature is unknown, identify the nearest heat source and provide available assembly measurements.
4. Contact Media
List each material that may contact the component during manufacturing, assembly, operation, cleaning and maintenance.
Examples include:
Air or process gases
Water
Steam
Oils and greases
Fuel
Coolant
Solvents
Cleaning chemicals
Adhesives
Mold-release agents
Adjacent plastics or coatings
Use the exact trade name, chemical composition or safety-data information when available. General descriptions such as “oil resistant” or “chemical resistant” are not sufficient for compatibility review.
5. Material and Performance Requirements
If a silicone grade has already been approved, provide the exact compound reference and revision. If the material remains open, define the required performance instead of selecting a grade from color or appearance.
Possible requirements include:
Shore A hardness
Tensile and elongation limits
Tear resistance
Compression set
Heat-aging retention
Low-temperature flexibility
Fluid-immersion limits
Dielectric strength
Volume resistivity
Flame classification
Tracking or arc resistance
Gas-permeability limit
Low-volatility requirement
Color stability
Bond strength
Separate mandatory requirements from preferences. An unnecessarily restrictive specification can reduce available manufacturing options without improving function.
6. Product-Specific Inputs
For Silicone Tubing
Provide:
ID, OD and wall thickness
Cut length
Concentricity or ovality requirement
Minimum bend radius
Kink limit
Working and burst pressure where applicable
Vacuum requirement
Connection type
Pull-off force
Flow requirement
Permeability limit
Cleanliness and packaging
For Molded Seals and Gaskets
Provide:
Groove or flange dimensions
Compression target
Mating-surface condition
Fastener or clamp load
Permitted leakage
Assembly lubricant
Flash location
Parting-line restrictions
Installation method
Reuse requirement
For Grommets and Protective Components
Provide:
Panel thickness
Hole diameter
Groove dimensions
Cable or shaft diameter
Installation direction
Insertion and retention force
Edge condition
Movement after assembly
7. Regulatory and Documentation Requirements
Identify the destination market and required evidence before quotation.
This may include:
Food-contact declaration
Medical or biological evaluation
RoHS and REACH documentation
Restricted-substance declaration
UL recognition or flammability data
Material traceability
Certificate of analysis
First-article inspection report
Production inspection report
Change-notification requirement
Retention period for batch records or samples
Do not request a generic “compliance certificate.” Name the regulation, standard, customer specification or required document.
8. Validation Requirements
Define who will perform each test, who pays for it and what constitutes approval.
Clarify:
Sample quantity
Prototype tooling or production tooling
Test methods
Test conditions
Acceptance limits
Required report format
Customer assembly trial
Responsibility for regulatory testing
Approval authority
Revalidation triggers
If the initial samples use substitute tooling, compound or processing conditions, the report should identify those differences.
9. Commercial and Supply Information
A technically suitable quotation also depends on production and supply expectations.
Provide:
Estimated annual quantity
Order quantity or release schedule
Prototype quantity
Target production date
Packaging quantity
Labeling format
Shelf-life requirement
Delivery destination
Forecast variability
Spare-parts demand
Tool ownership requirement
Annual volume can influence the preferred molding route, cavity count, automation level and tooling investment.
Practical Questions You Still Ask
Is silicone rubber a thermoset or a thermoplastic?
Most cured products are thermoset elastomers. Crosslinking creates a permanent network, so the finished article cannot normally be remelted and molded again like a conventional thermoplastic.
No. It is synthetic and is not made from natural rubber latex. If natural rubber is prohibited, obtain a declaration covering adhesives, coatings, processing aids, packaging and other assembly materials as well.
It cannot normally be remelted. Some clean scrap may be ground as filler or handled through specialized chemical recovery, subject to cure chemistry, contamination, volume and local infrastructure.
Odor may come from cure by-products, cleaning agents, packaging or insufficient post-cure. It neither identifies the exact grade nor proves noncompliance. Odor-sensitive projects need an agreed process and evaluation method
Keep uncured systems sealed within the supplier’s temperature and shelf-life limits. Protect finished articles from heat, sunlight, contamination and deformation; do not compress or sharply bend soft tubing during storag
Some grades tolerate repeated steam, ethylene oxide or radiation cycles, but compatibility is not universal. Validate the exact method, dose or temperature, cycle count, packaging and finished geometry.
FTIR can often identify the polymer family, while other tests estimate hardness, filler or thermal behavior. Analysis may not reveal the commercial grade, additive package, cure history or original dimensions
No. Concentrated or high-pressure oxygen requires dedicated compatibility, ignition-risk and cleanliness assessment. Formulation, residues, particles, pressure, temperature and flow all matter
Is Silicone the Right Choice for Your Design?
Silicone is a strong candidate when temperature stability, electrical insulation or weather resistance outweighs abrasion, fuel exposure and gas permeability. Match the compound, geometry and production method to measurable risks, then validate representative parts. Submit your drawing and service conditions for an engineering review
"Take The Efficient Booster For Your Business Now "
Alan Chen
Product Sales Manager & Rubber Specialist at RISEUP